Iogear GUIP204 v2 Manuale Utente

1GUIP204Part No. M1057-aInstallationInstallation Guide4-Port USB Sharing Hub

10Software InstallationPlease insert the driver CD into your PC. The CD should auto play and bring up the software installer. If you have disabled t

11PLEASE RESTART THE SYSTEM AS REQUESTED BY THE IN-STALLER WHEN THE INSTALLA-TION COMPLETES, OTHERWISE THE SOFTWARE MIGHT NOT WORK PROPERLY.

1213Firewall SettingThe software application should automatically launch after your computer restarts. If not, please double click the shortcut icon o

1213If your Windows system or rewall program blocks the program, PLEASE “UNBLOCK” or “ALLOW ACCESS” for both Private and Public networks.After you ha

1415Network Device OverviewThe main dialog box consists of a Control Menu (File, Options, View and Help) & a tree view in the middle that displays

1415Status of USB DeviceThe device might be in one of the following states and there are different things you can do with it in each of the states. Ea

1617Occupied by YouWhen you are Connected to a device, the Blue icon turns into an Green icon to show that the device is locally connected.

1617Occupied by Other UserDevice on Different SegmentThis icon with question mark indicates that the server’s IP address is on a different network seg

1819Access a USB deviceTo connect to a USB device, please select it on the tree view and click on Connect Device button or double-click on it. This pr

1819To disconnect the USB device, select the device and Disconnect Device.Clicking on this button releases the selected device for other users. Once y

2021Server CongurationsUsers can congure the server settings using two different methods. Select the USB server on the tree view and right-click on

2021Or click on the “Open Web Page” button on the bottom.

2223The main page of the conguration tool shows the status of the USB Server and the device(s) connected to it. Click on “Device Status” from the Lef

2223NetworkThis page displays the current network setting. If you need to assign the server a static IP, please Disable the DHCP option as well. Once

2425Firmware UpdatePlease check IOGEAR Website to see if any new rmware is available before you proceed.http://www.iogear.com/support/dm/driver/GUIP2

2425Reset Device Click on “Reset Device” to reboot the server. By default, there is no password set for the server therefore you do not have to enter

2627Factory DefaultClick on “Factory Default” to restore the server’s settings back to the factory default. Again, the password is not necessary if no

2627Password Change To change the password, you must enter the current password, input new password, re-input new password for conrmation, then click

2829Automatic Printer SwitchWhen you send a print job to a specic printer, the server detects the task and AUTOMATICALLY connects to this printer to

2829There are two ways to automatically connect USB devices: automatic connection by device or automatic connection by USB port.Automatic Connection

Table of ContentsPackage Contents 4System Requirements 5Product Overview 6Hardware Installation 7Software Installation 10Firewall Setting 12Network

3031Automatic Connection by USB Port Select the USB server on the tree view and right-click on the icon to bring up the Server Congurations.When this

3031Auto Disconnect This feature automatically disconnects a printer or an external hard drive when a user is done with the device or the device has b

3233Software Program ShortcutThis function creates a shortcut to start up a software application and connect your computer to a specic USB device at

3233A wizard will guide you through the process. 2. Refer to your device’s user manual, select the specic scanning application that comes with your

3435Make sure that the program path has been 3. correctly captured and then click on the OK button.A new shortcut has been created on your 4. Desktop

3435When you double click the new 5. shortcut, the computer will launch the software and connect to the MFP / scanner at the same time. Now you can op

3637Device PropertyYou can check the device status or set an automatically launched program from the “Device Properties”.If the USB device you connec

3637Server SettingsBy default, the server application software automatically launches when you start up your computer. If you prefer not to run this

3839Connect Device or Disconnect Device: Select a specic USB device, then connect or disconnect the device under the top menu “Options”.Request Disc

3839Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FRO

45Package Contents1 x 4-Port USB Sharing Hub (also referred to as “server” or “Net ShareStation” in this document)1 x RJ45 Ethernet Cable 1 x Software

4041Federal Communications Commission (FCC) StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,

4041CE StatementThis device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law

4243ContactIOGEAR19641 Da VinciFoothill Ranch, CA 92610P 949.453.8782 F 949.453.8785Visit us at: www.iogear.com ©2010 IOGEAR®. All Rights Reserved. PK

4243

FUNIOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products.GREE

45System Requirements Computer: CPU of 1.7GHz and above • Minimum 512MB RAM • Windows XP, Windows Vista, Windows 7• Available Ethernet port in home/of

67USB connection LED (Port 4, Port 3, Port 2, Port 1)1. USB port (Port 1)2. Power Adapter Port3. Network Port4. Reset Button5. USB ports (Port 2, Port

67NOTE: Before you connect your USB device to the network, please refer to the device’s user manual and install the device’s driver and required softw

89EthernetReset12Vdc 5AConnect the USB Sharing Hub to the router or switch with the included Ethernet cable.2. router (not included)

89EthernetReset12Vdc 5AConnect the power adapter to the USB Sharing Hub. Turn on your USB device. The USB connection LED will turn on 3. indic